[email protected]

AISI 4140 Alloy Steel (UNS G41400)

Dec 18, 2019 · Properties Metric Imperial; Tensile strength:655 MPa:95000 psi:Yield strength:415 MPa:60200 psi:Bulk modulus (typical for steel) 140 GPa:20300 ksi:Shear modulus (typical for steel) 80 GPa:11600 ksi:Elastic modulus:190-210 GPa:27557-30458 ksi:Poisson's ratio:0.27-0.30:0.27-0.30:Elongation at break (in 50 mm) 25.70%:25.70%:Hardness, Brinell:197:197 ASTM A193 Grade B7 Specification - Boltport FastenersASTM A193 Grade B7 Specification for high tensile bolts, screws, stud bolts, threaded rods, anchor bolts and other externally threaded fasteners, made from heat-treated chromium-molybdenum alloy steel grades such as 4140, 4142, 4145, 4140H, 4142H, and 4145H in SAE & AISI classification. ASTM A193 specification covers requirements for chemical composition, mechanical properties, hardness, heat


The mechanical properties of steel materials will be different with different loading properties (such as tension, compression, torsion, impact and cyclic loads). Common mechanical properties include strength, plasticity, hardness, impact toughness, multiple impact resistance and fatigue limit. The mechanical properties of ASTM A29 1029 ASTM A29/A29M is in line with ASTM A29/A29M. The main properties ASTM A29 Continental AlloysAvailable in mechanical tube dimensions of 134.37 mm (5.29") od to 457.2 mm (18") od / 18.11 mm (0.71") wall to 55.25 mm (2.18") wall Length range up to 10.67 m (35') 4130 has improved weldability compared to 4140 (which has a higher carbon level) though this is achieved at the expense of through thickness strength. ASTM A400 - 69(2012) Standard Practice for Steel Bars 1.2.1 Classes P and Q should be capable of developing the mechanical properties shown in Tables 1-4 by liquid quenching from a suitable austenitizing temperature, and tempering at 800 ° F (427 ° C) or higher. A hardness indicated by tests made at a location shown in Fig. 1, A, B, or C, is taken as evidence that a composition is capable of

ASTM A574 Baden Steelbar & Bolt Corp.

ASTM A574. A574 is a ASTM International specification for steel socket head cap screws. A574 covers quenched and tempered alloy steel hexagon socket-head cap screws, 0.060 through 4" in diameter where high strength is required. A574 MECHANICAL PROPERTIES:FULL SIZE SCREWS. ASTM A653 Properties (Chem., Mech. & Rankings)Sep 16, 2020 · Ok let's start with ASTM A653 chemical composition. Chemical Composition Grade CS Type B C 0.02 - 0.15 Mn max. 0.60 P max. 0.030 S max. 0.035 Cu max. 0.20 Ni max. 0.20 Cr max. 0.15 Mo max. 0.06 V max. 0.008 Nb max. 0.008 Ti max. 0.025 Learn more about chemical composition. Now it's the mechanical properties turn:Yield Strength Grade CS Type B Datasheet for Steel Grades Structure Steel ASTMThis page is mainly introduced the ASTM 1008 Datasheet, including chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of ASTM 1008,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials

Kapton® Summary of Properties - DuPont

3 DUPONT KAPTON® SUMMARY OF PROPERTIES Table 1. Physical Properties of Kapton® Type 100 HN Film, 25µm (1 mil) Physical Property Typical Value at 23°C (73°F) 200°C (392°F) Test Method Ultimate Tensile Strength, MPa (psi) 231 (33,500) 139 (20,000) ASTM D-882-91, Method A* Mechanical Properties - TP 304L 1.4307 Stainless Steel Properties:Minimum Mechanical Properties Required by ASTM A213 & ASME SA-213:304:304L:304H:0.2% Offset Yield Strength, psi MPa:30,000 205:25,000 170:30,000 Mechanical Properties Testing for Metal Parts Made via ASTM and 29 ISO covering the measurement of material properties. The following is organized into two sections:(1) deformation properties (where the tests attempt to quantify how a material will yield or deform) and (2) failure properties (where the tests attempt to

Standard Guide for Evaluating Mechanical Properties - ASTM

ASTM Standards. A370 Test Methods and Definitions for Mechanical Testing of Steel Products. A1058 Test Methods for Mechanical Testing of Steel Products--Metric. B211 Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire. B348 Specification for ium and ium Alloy Bars and Billets