[email protected]

1.4542 S17400 630 17-4PH Precipitation Hardening Stainless

1 1.4542 Introduction:Alloy 17-4PH (UNS S17400), Type 630, is a chromium-nickel-copper precipitation hardening martensitic stainless steel with an addition of niobium. 17-4PH combines high strength and hardness with good corrosion resistance. The alloy is furnished 17-4 PH Stainless Steel Bolts and A564 gr 630 Hex Bolt ASTM A564 gr 630 Hex Bolts and 17-4 PH Stud Bolt manufacturer in India 17-4 PH Stainless Steel Fasteners is a hardware device that mechanically joins or affixes two or more objects together. It is used to create non-permanent joints; that is, joints that can be removed or dismantled without damaging the joining components.

17-4-PH - UNS S17400 - AISI 630 - 1.4542 - X5CrNiCuNb16

Custom 630® JUS630 Supplied as:Rolled - Forged round bar, annelaed, double aged and precipitated hardened. In commercial length or cut to size. Certificied to EN 10204 3.1. - ASTM A564 - ASTM A484 - API 6A - H1150D - On request also acc. to COND. A - 1025 - 1075. Only western Europe origin. ARMCO 17-4 PH - AK SteelComposition (wt %) Carbon (C) 0.07 max. Manganese (Mn) 1.00 max. Phosphorus (P) 0.04 max. Sulfur (S) 0.03 max. China Powerful Factory Astm A564 / H1100 Heat Treated 630 17-4PH, also known as type 630, is famous for it's high tensile strength & high hardness after age hardening treated. We produce strictly as per ASTM A564 standard with different heat treatment conditions, such as condition H900, H1025, H1075, H1100, H1150, H1150M, H1150D etc., mainly used as marine shaft, motor shaft, impreller, offshore industry.

Stainless 17-4 PH

ASME:SA564, SA693, SA705, Type 630 AMS:5604, 5622, 5643, 5825 ASTM:A564, A693, A705, Type 360 UNS:S17400 W. Nr./EN:1.4548 Resistance to Corrosion:Type 17-4 PH stainless steel has excellent resistance. It withstands corrosive attack better than any of the standard hardenable stainless steels and is comparable to type 304 in most media. Stainless Steel - Grade 630 - AZoM

  • Chemical FormulaIntroductionKey PropertiesCompositionMechanical PropertiesPhysical PropertiesGrade Specification ComparisonPossible Alternative GradesCorrosion ResistanceHeat ResistanceFe, <0.07% C, 15-17.5% Cr, 3.0-5.0% Ni, <1.0% Mn, <1% Si, <0.040% P, <0.03% S, 3.0-5.0% Cu, 0.15-0.45% Nb+TaSPECIFICATION FOR HOT-ROLLED AND COLD-FINISHED 2.1 ASTM Standards: Type 630, Solution,Annealed Cold Finished Ccnterlcss Ground, 1 TABLE 1 CHEMICAL REQUIREMENTSA Composition, % UNS Designation8 Type Carbon Manganese Phosphorus Sulfur Silicon Chromium 517400 630 0.07 1.00 0.040 0.030 1.00 517700 631 0.09 1.00 0.040 0.030 1.00 Stainless Steel Alloy 17-4PH - Austral Wright
    • Alloy17-4Ph Uns-S17400Typical ApplicationsDescriptionAvailabilityCorrosion ResistanceMachinabilityWeldabilityHeat TreatmentCastingsAlso known as AISI Grade 630 Stainless Steel Alloy Grade 17-4PH is a precipitation hardening stainless steel which has extremely high strength and hardness, combined with good ductility and toughness. It has excellent corrosion resistance, approaching that of stainless steel grade 304. Designers and engineers often choose the alloy for its high strength, with corrosion resistance superior to most other high strength steels.Source High Tensile ASTM A564 Grade 630 Stainless Steel 1. Product:630 stainless steel shaft:2. Material:* American name:AISI 630, also known as 17-4PH, 1.4542, UNS 17400 * Chinese name:00Cr17Ni4Cu4Nb * Germany name:Din 1.4542:3. Standard:ASTM A564:4. Diameter:Ø1/4''~Ø16'' Such as Ø1'', Ø2'', Ø2.5'', Ø3'', Ø3.5'', Ø4'', Ø4.5'', Ø4.5'', Ø5'',Ø6'', Ø8'', or customized:5. Length:1~ 8meters:6. Surface:

      Technical Data Sheet - ugitech

      ASTM) and customers ones EN WL AMS ASTM Other EN 10088-3 AMS 5643 AMS 5622 ASTM A564 1.4542 1.4548 (ESR) UNS S17400 UNS 17400 type II UNS S17400 AISI 630 ASME SA564 Elaboration:EAF + AOD - Standard version EAF + AOD + ESR Refined version, type II Steelinox BV 1.4542 630 17-4PHand N2 should be avoided. The welding wire used as filler metal can be ER308LSi (1.4316) or a homogeneous filler called 630 (17-4PH) Heat Treatment To ASTM A564/A564M and EN10088-3 After annealing from 1030°C to 1050°C, 1.4542 presents a soft martensitic structure with a